Analytics
Siemens
The analysis of process gases is very complex. To obtain exact results on the composition of the gases, the measurement results must be very precise. Whether innovative analysis technology, tailor-made plant construction, or in-depth knowledge of your application – we support you when it comes to efficient process analysis in compliance with strict legal requirements.
Siemens provide a wide range of Gas Analyser solutions of which the SIPROCESS GA 700 is the process analyser of choice when it comes to meeting all requirements and legal guidelines. The GA 700 latest features of plug-and-measure, set-and-forget but also about vibration compensation and many other highlights to help improve your plant performance. By combining two modules from a choice of OXYMAT 7, CALOMAT7 and ULTRAMAT 7, it is possible to achieve combined measurements, cross gas correction and optimisation. The GA700 can be wall-mounted or rack-mounted, and is configured automatically.
For more information, see the dedicated Siemens Analytical Measurement page. Contact us via email at support@parmley-graham.co.uk, or call us directly on 01914780404. Alternatively, you can send us your enquiry by filling the form below.
Bürkert Fluid Control Systems
Bürkert have a wide range of analytical products covering pH/ORP, Conductivity, Chlorine and Turbidity.
The multichannel systems for water with its modular assembly makes this a very versatile option for a lot of applications.
An all-round liquid analysis product would be the Bürkert 8905 online analysis system, providing an online solution to important water parameters, found within one compact and modular unit. Working alongside Bürkert SENSOR CUBES, this continuous analysis solution can measure pH, turbidity, ORP (oxidation reduction potential) and more. The measuring system can be built to requirements, and is again very simple to configure and maintain.
Georg Fischer
GF Piping Systems (Georg Fischer) offer a wide range of liquid analytical instruments that encompasses key areas such as pH measurement, conductivity, resistivity, dissolved oxygen, and chlorine analysis.
The sensor probes are designed for almost all applications particularly where corrosion is an issue. Combined with a choice of controller transmitters which are modular in construction and can be field or panel mount gives versatility to matching your application requirements.
Kobold Messring
Kobold Messring has a range of Humidity meters for all applications. From simple wall mount meters for room humidity measurement and probe type transmitters for duct and enclosed space measurement. Handheld meters also available.
The Kobold Insertion Turbidity Probes ATL-F and ATL-N are high-precision, single channel absorption probes. The probes use the light in the visible (VIS) (ATL-F) range at a selected wavelength of 430 nm and near infrared (NIR)(ATL-N) from 730 … 970 nm. An optical filter on the lamp side adapts the wavelength for specific applications and allows colour measurements with great accuracy (e.g. phase separation beer/water) at 430 nm.
The high precision inline Kobold single-beam turbidity sensor ATA-K measures the degradation of light (in the near infrared range, NIR) passing through the process medium. The process medium is penetrated by a suitably focussed, constant beam of light. Whereas the model ATS-K is a high precision 2-beam scattered light sensor. It uses the light scattered in the forward direction (11°) and the transmitted light to measure the particles. The sensor is manufactured from stainless steel and has been designed for fitting in process pipework. The sensor uses visible (VIS) and near infrared (NIR) light from 400 to 1100 nm.
Kobold also have a range of pH/ORP, Redox and Conductivity sensors with transmitters/meters for industrial installation.
To find out more about Kobold Messring products, contact us via email at support@parmley-graham.co.uk, or call us directly on 01914780404. Alternatively, you can send us your enquiry by filling the form below.
