Technical Support 0191 478 0404

Sales 0191 478 0400

Technical Support

0191 478 0404

Sales

0191 478 0400

Account

Cart

FAQs

Menu

Product Categories

Technical Support 0191 478 0404

Sales 0191 478 0400

Browse product categories

Current & selectivity monitoring

Current & selectivity monitoring
 

SITOP selectivity modules

Selectivity and fast fault location in 24-V DC load circuits

The SITOP selectivity and diagnostics modules are the optimal extension for all 24-V DC power supplies. They distribute and monitor the load current over several current circuits. Overloads and short circuits on a circuit are reliably recognized and the faulty 24-V DC load circuit reliably disconnected, while the other loads continue with absolutely no interruption; this prevents the complete failure of the plant.

  • Reliable tripping, regardless of the cable lengths or cable cross-sections
  • 4 or 8 24-V DC load feeders per module
  • Alternative switch-off characteristics:

– Limiting – prevents short-term voltage drop to below 20 V

– Switching – can result in short-term voltage drop to below 20 V

  • Diagnostics via common signaling contact or single channel signaling
  • SEL1200/1400: 4 or 8 outputs, each with diagnostics of voltage, current, set threshold, reason for disconnection (if applicable)
  • PSE200U: 4 outputs with voltage measuring point for current (1 V ? 1 A)
  • Evaluation by free SIMATIC S7 function blocks for modules with single-channel signaling

SITOP inrush current limiters

Protection for your loads

As a ballast unit for SITOP power supplies, SITOP inrush current limiters reliably reduce inrush currents like those caused by the rectifier circuit on the input side with capacitor charging – as in the case of pulse-controlled power supplies. An inrush current limiter can also significantly extend the service life of the connected loads.

  • Maximum service life of current-sensitive components like relays thanks to reduced current inrushes
  • Space-saving, thanks to narrow width of only 18 mm
  • Suitable for LOGO! modules and sub-distribution boards thanks to stepped profile
  • Flexible installation on the DIN rail, on the wall or in various other locations
  • Maximum plant configuration enabled
  • Flexible application options at temperatures ranging from -40° Celsius to +70° Celsius

Build innovative machines faster without costly prototyping with Efficient Motion Control.

With Effective Motion Control, machine builders can easily overcome major challenges and enable faster time-to-market, increased functionality, resolve complex system requirements, and demands for safety and sustainability. 

We are Siemens trusted and approved distribution partner.

As a Value Added Reseller in Siemens’ Approved Partner network, Parmley Graham is a proven supplier of a wide range of quality products in the UK and globally. 

Find out more how this will benefit you or check Siemens Configurator.

Product Search

Multiple parts? Search

Subscribe to our Newsletter