Filter products

Anybus Wireless Bolt NB-IoT

The Anybus Wireless Bolt IoT gives devices, machines and equipment an Internet connection. This solution uses the latest LTE standards NB-IoT and CAT-M1 and fits both stationary and mobile equipment. These new LTE standards are so called LP-WAN technologies (Low Power Wide Area Network) adapted for the new IoT use cases. This means Low Power consumption, Low Bandwidth (25-300 kbit/s), Good geographical coverage and Lower Cost.

Anybus Wireless Bolt NB-IoT
Anybus Wireless Bolt NB-IoT

Anybus Wireless Bolt IoT

The Anybus Wireless Bolt IoT gives devices, machines and equipment an Internet connection. This solution uses the latest LTE standards NB-IoT and CAT-M1 and fits both stationary and mobile equipment. These new LTE standards are so called LP-WAN technologies (Low Power Wide Area Network) adapted for the new IoT use cases. This means Low Power consumption, Low Bandwidth (25-300 kbit/s), Good geographical coverage and Lower Cost. 

The innovative hardware form-factor with its M50 throughhole mount enables effective access to good cellular connectivity, without losing coverage due to long and lossy antenna cable. The Bolt IoT is up-to-date with the latest 4G LTE standards NB-IoT and CAT-M1 and, to be globally effective, it uses 2G (GPRS/EDGE) fallback enabling deployment almost anywhere in the world.

Features & Benefits

  • Intuitive and interesting form-factor; M50 through-hole mount on any flat surface
  • World-wide coverage on a single module with industry and mobile network certifications
  • LPWA Global 13 band LTE NB-IoT, LTE CAT-M1 and GPRS/EDGE failback
  • Ultra-Low Power Mode; Reduce power consumption for battery or solar/wind powered applications
  • Host interface RJ45 with 10/100 Mbit/s Ethernet
  • PoE (Power over Ethernet) option, single cable with both power and communication
  • Transparent transfer of any TCP/UDP based protocol
  • Built-in firewall, NAT and DHCP server
  • Nano SIM-card slot.

echnical Specifications

Cellular standards

4G LTE: Category Cat-M1 and NB-IoT. Frequency Bands B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B26, B28
2G: EDGE, GPRS bands 850, 900, 1800, 1900

Host interface RJ45 Ethernet 10/100 Mbit/s
Operating temperature. Shadow black and white: -40 to +65 °C, Direct sunlight: Black -40 to +45 °C, White -40 to +65 °C (Storage temperature: -40 to +85 °C)
Data speeds

Peak Download Rate Cat-M1: 300kbps, NB-IoT: 27kbps, 2G/EDGE: 200kbps
Peak Upload Rate Cat-M1: 375kbps, NB-IoT: 65kbps, 2G/EDGE: 200kbps

Latency

CAT-M1: 10ms–15ms
NB-IoT: 1.6s–10s
2G/GPRS/EDGE: 700ms–2s

Power

11-33 VDC, PoE (Power over Ethernet) PD according to IEEE 802.3af. Redundant or separate operation of PoE and screw terminals for increased robustness.
Power Consumption: Sleep Mode: DC terminal 0,1W. PoE 0,3W
Idle Mode: DC terminal 0,6W. PoE 0,8W
Worst Case (GPRS/2G): DC terminal 3,2W. PoE 3,6W. Peak current: 1.2A@11VDC

Weight

95g

Connectors RJ45 Ethernet/PoE, 3-pin screw connector for power
Housing material Top: Valox 357X(f1) PBT/PC. Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 746C. Base: Celanex: XFR 6840 GF15. PBT glass reinforced plastic.
IP protection class IP66, IP67 and UL NEMA 4X for top (outside the host), IP21 for base (inside the host)
Dimensions Diameter: 68 mm. Overall height: 75 mm without DC-connector, 84 mm incl. PS-connector. Height aove mounting surface: 41 mm.
Mounting M50 screw and nut (50.5 mm hole needed)
Configuration Two different methods: 1. Accessing the built-in web pages via Ethernet. 2. Sending REST-commands via Ethernet.
Vibration compatibility Sinosodial vibration test according to IEC 60068-2-6:2007 and with extra severities; Number of axes: 3 mutually perpendicular (X:Y:Z), Duration: 10 sweep cycles in each axes, Velocity: 1 oct/min, Mode: in operation, Frequency: 5-500 Hz, Displacement ±3.5 mm, Acceleration: 2g. Shock test according to IEC 60068-2-27:2008 and with extra severities; Wave shape: half sine, Number of shocks: ±3 in each axes, Mode: In operation, Axes ± X,Y,Z, Acceleration: 30 m/s2 , Duration: 11 ms.
Humidity compatibility EN 600068-2-78: Damp heat, +40°C, 90% (non condensing).
Certifications CE/RED, FCC/IC, GCF and PTCRB, UL 62368/UL 60950
UL file E214107
Order Codes AWB1000 (Anybus Wireless Bolt IoT black)
AWB1001 (Anybus Wireless Sunbolt IoT white top and black base)

Ordering Information 

ORDER CODE(S): AWB1000 (Black top), AWB1001 (White top)

INCLUDED COMPONENTS:

  • 3-pin power screw connector.
  • Quickstart Guide.
  • Safety & Compliance sheet.

ACCESSORIES:
024707 - Power Supply 90-264 VAC to 24VDC 19W world socket kit,
1,4 meter cable and 3-pole Bolt power connector. 
AWB4005 - Anybus PoE injector 100-240VAC. 35W incl. world power cable
AWB4006 - Anybus PoE injector 12-57VDC. 30W, dual PoE ports

WARRANTY: 3 years

Did you know, we are an entrusted Siemens approved partner?

Loading...